en-USel-GRes-ES
Menu

Σεισμικές Εντάσεις

Εισαγωγή >
Ο σκελετός του κτιρίου
Η κατασκευή
Οπλισμός I
Οπλισμός II
Προμέτρηση και κοστολόγηση
Σχέδια εφαρμογής


Δυνάμεις σεισμού και ανέμου
Προσομοιώματα-Επιλύσεις
Προσομοίωση πλακών με πεπερασμένα
Ολόσωμες πλάκες
Σεισμική Συμπεριφορά Πλαισίων
Παράρτημα Α
Παράρτημα Β
Παράρτημα Γ
Παράρτημα Δ
Εισαγωγή

Υλικά
Συνεχίζεται >
Εισαγωγή

Σεισμικές επιταχύνσεις




Seismic action in X direction

Mass

a/g

H[kN]

V[kN]

Ten-storey building of mixed system. Diaphragmatic and non-diaphragmatic nodes.
Project <B_547-2>

Page from the software report
Distribution of seismic
accelerations-forces-shear forces

The seismic accelerations aXX, aXY, aXZ of each diaphragm are obtained under the X horizontal component of the seismic action using appropriate methods (e.g. the CQC method applied by the related software) from the combination of the modal analysis results. Their application point of the seismic accelerations is the diaphragm’s centre of mass. For nodes not belonging to a diaphragm, such as the nodes of the corner column of the building illustrated in the figure, the application point of the seismic accelerations is the node position.

Εφαρμογές: Καθαρά πλαισιακός φορέας

Structure comprising only columns, project <B_641-1>

Four cases are considered:

  1. Fixed condition at the ground level
  2. Foundation with footing beams
  3. Foundation with simple footings
  4. Basement with perimeter walls

The stiffnesses of elements are taken being equal to 50% of elastic. 12 mode shapes are taken into account.

 

Γενικά συμπεράσματα του πλαισιακού συστήματος

1)    In all cases only the x horizontal component of the seismic action is considered, the y component produces almost identical results.

2)    The natural period of the first mode shape is of the order of 1 sec, while, if the stiffnesses of the elements are taken as being 100% of the elastic, the value of periods is of order of 0.65 sec (see §6.3.3).

3)    Apparently the more economical solution of simple footings without strap (connecting) beams eventually becomes the most unfavourable one, even for economic reasons due to the need for additional reinforcement and increased dimensions of beams and columns cross-sections.

4)    The best solution is the basement with perimeter walls, i.e. along the 75% of the perimeter, as providing behaviour that better approximates the fixed condition.

        5)   The bending moments of the two characteristic columns reflect the stress relation between the various cases.

Αποτελέσματα της δυναμικής ανάλυσης του πλαισιακού φορέα
Πάκτωση στη στάθμη του εδάφους (μελέτη <Β_641-1>)

Figure 6.4.1-2: 1st mode in X:
T=0.975 sec, participation 84%

Figure 6.4.1-3: 2nd mode in X:
T=0.321 sec, participation 10%

Figure 6.4.1-4: 3rd mode in X:
T=0.189 sec, participation 3.5%

Figure 6.4.1-5: 4th mode in X:
T=0.134 sec, participation 1.6%


The sum of the effective modal masses of the first four modes amounts to 99% of the total mass. The first mode is the fundamental one as its effective mass is the 84% of the total mass.

1η περίπτωση: Πάκτωση στη στάθμη του εδάφους (μελέτη <Β_641-1>)

Figure 6.4.1-6: Structure and model
Frame system with q=3.60

Figure 6.4.1-7: Seismic acceleration-forces-shear forces
1st fundamental period:T1=0.975 sec, participation 84%

 

 

 

 

 

Bending moments of ground floor columns

Figure 6.4.1-8: Displacements under seismic action in x
δmax=24.5 mm

Figure 6.4.1-9:
Ground floor column
0c2 (400/400)

Figure 6.4.1-10:
Ground floor column
0c6 (500/500)

The bending moment of the middle column c6 is roughly twice the value corresponding to the perimeter column, due to its stronger section.

2η περίπτωση: Θεμελίωση με πεδιλοδοκούς (μελέτη <Β_641-2>)

Figure 6.4.1-11: Structure and model
Frame system with q=3.60

Figure 6.4.1-12: Seismic acceleration-forces-shear forces
1st fundamental period:T1=1.012 sec, participation 85%

 

 

 

Bending moments of ground floor columns

Figure 6.4.1-13: Displacements under seismic action in x
δmax=25.7 mm

Figure 6.4.1-14:
Ground floor column
0c2 (400/400)

Figure 6.4.1-15:
Ground floor column
0c6 (500/500)


Due to stronger cross-sections of footing beams compared to those of columns, the displacement of the structure is slightly larger than that of assumed fixity at the base (25.7 against 24.5).

3η περίπτωση: Θεμελίωση με απλά πέδιλα (μελέτη <Β_641-3>)

Figure 6.4.1-16: Structure and model
Torsionally flexible system with q=2.00

Figure 6.4.1-17: Seismic acceleration-forces-shear forces
1st fundamental period:T1=1.075 sec, participation 88%

 

 

 

Bending moments of ground floor columns

Figure 6.4.1-18: Displacements under seismic action in x
δmax=47.6 mm

Figure 6.4.1-19:
Ground floor column
0c2 (400/400)

Figure 6.4.1-20:
Ground floor column
0c6 (500/500)

In the absence of strap beams, the structure is classified as torsionally flexible system with q=2.00.

The displacement is almost twice that of the strong foundation (47.6 against 25.7 mm).


4η περίπτωση: Υπόγειο με περιμετρικά τοιχία (μελέτη <Β_641-4>)

Figure 6.4.1-21: Structure and model
Frame system with q=3.60

Figure 6.4.1-22: Seismic acceleration-forces-shear forces
1st fundamental period:T1=0.999 sec, participation 71%

 

 

 

 

 

Bending moments of ground floor columns

Figure 6.4.1-23: Displacements under seismic action in x
δmax=25.3 mm

Figure 6.4.1-24:
Ground floor column
0c2 (400/400)

Figure 6.4.1-25:
Ground floor column
0c6 (500/500)


The overall behaviour of the structure is better than the one corresponding to the strong foundation at the ground floor, approaching that for assumed fixity at the base.

Εφαρμογές: Μικτός τοιχωματικός φορέας

Structure comprising only columns and perimeter walls, project <B_642-1>

 The structure derives from the frame type structure by replacing columns c2, c5, c8 and c11 of cross-section 400/400 with four perimeter walls of cross-section 2000/300.

 

It is extremely useful to compare between the variants of the wall system, but also between the frame and wall systems.


Γενικά συμπεράσματα του τοιχωματικού συστήματος

1)    In all cases, the natural period of the first mode shape is of the order of 0.70 sec. If however the stiffnesses of the elements are taken as being 100% of the elastic, the value of periods is of order of 0.50 sec.

2)     The wall system behaviour is clearly better than the behaviour of the frame system, particularly when in the presence of a basement with perimeter walls.

Αποτελέσματα της δυναμικής ανάλυσης του τοιχωματικού φορέα
Πάκτωση στη στάθμη του εδάφους (μελέτη <Β_642-1>)

Figure 6.4.2-2: 1st mode:
Tx=0.644 sec, Cx=6.6%, Cy=70.7%

Figure 6.4.2-3: 2nd mode:
Tx=0.639 sec, Cx=70.5%, Cy=6.6%

Figure 6.4.2-4: 3rd mode:
Tx=0.456 sec, Cx=0.5%, Cy=0.0%

Figure 6.4.2-5: 4th mode:
Tx=0.187 sec, Cx=1.8%, Cy=10.7%


In the absence of symmetry in y direction, the fundamental mode shape in x (the 2nd) has also a component in y, meaning that both translational and torsional responses are developed.

The sum of the effective modal masses of the 12 first modes amounts to 99.5% and 98.1% of the total mass of the structure in x and in y directions respectively.


1η περίπτωση: Πάκτωση στη στάθμη του εδάφους (μελέτη <Β_642-1>)

Figure 6.4.2-6: Structure and model
Ductile wall system in X and Y, with q=3.60

Figure 6.4.2-7: Seismic acceleration-forces-shear forces
1st fundamental period:T1X=0.639 sec, participation 70%

 

 

 

 

 

Bending moments of ground floor columns

Figure 6.4.2-8: Displacements under seismic action in x
δmax=16.3 mm

Figure 6.4.2-9:
Ground floor wall
0c2 (2000/300)

Figure 6.4.2-10:
Ground floor column
0c6 (500/500)



The displacement of the wall type structure is significantly smaller than the one of the frame type structure of the previous paragraph (16.3 mm against 24.5 mm).

The bending moment of the first storey, is carried almost exclusively by the walls.

2η περίπτωση: Θεμελίωση με πεδιλοδοκούς (μελέτη <Β_642-2>)

Figure 6.4.2-11: Wall-equivalent dual system in X, ductile wall system in Y, with Y, q=3.00

Figure 6.4.2-12: Seismic acceleration-forces-shear forces
1st fundamental period:T1X=0.709 sec, participation 75%

 

 

 

Bending moments of ground floor columns

Figure 6.4.2-13: Displacements under seismic action in x
δmax=21.3 mm

Figure 6.4.2-14:
Ground floor wall
0c2 (2000/300)

Figure 6.4.2-15:
Ground floor column
0c6 (500/500)


The cross-sections of the footing beams are not strong enough to carry the high bending moments of the perimeter walls, resulting in the system along y to shift to a wall-equivalent dual system one with overall q=3.00. Moreover, the displacement of this system, along x, is equal to 21.3 mm compared to 25.7 mm of the corresponding frame system. Compared to case 1, the bending moments of the walls are smaller, while of columns are higher.

3η περίπτωση: Θεμελίωση με απλά πέδιλα (μελέτη <Β_642-3>)

Figure 6.4.2-16: Structure and model
Wall-equivalent dual system in X and Y with q=3.00

Figure 6.4.2-17: Seismic acceleration-forces-shear forces
1st fundamental period:T1X=0.818 sec, participation 78%

 

 

 

Bending moments of ground floor columns

Figure 6.4.2-18: Displacements under seismic action in x
δmax=23.9 mm

Figure 6.4.2-19:
Ground floor wall
0c2 (2000/300)

Figure 6.4.2-20:
Ground floor column
0c6 (500/500)


In both directions the structure functions as a wall-equivalent dual system, due to attenuation of wall behaviour caused by the ground’s low ability to oppose rotation.

The situation would be considerably improved using strong strap beams.

The bending moments of the first storey walls reflect more the frame than the wall behaviour.

 

4η περίπτωση: Υπόγειο με περιμετρικά τοιχία (μελέτη <Β_642-4>)

Figure 6.4.2-21: Structure and model
Ductile wall system in X and Y with q=3.60

Figure 6.4.2-22: Seismic acceleration-forces-shear forces
1st fundamental period:T1X=0.643 sec, participation 61%

 

 

 

 

 

Bending moments of ground floor columns

Figure 6.4.2-23: Displacements under seismic action in x
δmax=16.4 mm

Figure 6.4.2-24:
Ground floor wall
0c2 (2000/300)

Figure 6.4.2-25:
Ground floor column
0c6 (500/500)

Προσεγγιστικός υπολογισμός πλαισιακού φορέα

Step 1:

 

The building height is H=6·3.0=18.0 m.

The structure is classified as wall system in both directions, thus Ct,x=Ct,y=Ct=0.050. The structure is also regular in both plan and elevation, thus q=3.60.

T1,x= T1,y=Τ1=Ct·H3/4=0.050·18.03/4=0.44 sec

 

Step 2:

 

Since 0.15=TB≤0.44=T1<0.50=TC (see §6.1.6)
Sd(T1)=γI·agR·S·(2.5/q)=1.0·0.15·1.2·2.5/3.6= 0.125g.

Since T1=0.44≤1.00=2TC à λ=0.85, thus aCM=λ·Sd(T1)=0.85·0.125g=0.10625g

 

Step 3:

 

The mass of each floor is M=186.3 t, except from the mass of the last floor which is M6=165.0 t, therefore Σ(Mi)=165.0+5·186.3=1096.5 t.

The elevation of the centre of mass is

ZCM=Σ(Mj·Zj)/Σ(Mj)= =(186.3·3.0+186.3·6.0+186.3·9.0+186.3·12.0+186.3·15.0+165.0·18.0)/1096.5=11353.5/1096.5 à ZCM=10.4 m

The triangular distribution gives the accelerations by means of the expression

aj=(Zj/ZCM)·aCM=(0.10625g/10.4)·Zj à aj=0.0102g·Zj

which yields a1=0.031g, a2=0.061g, a3=0.092g, a4=0.122g, a5=0.153g, a6=0.184g and seismic forces H1=a1·M1=0.031·10m/sec2·186.3·103kg=58 kN, H2=114, H3=171, H4=227, H5=285 and H6=0.184·10m/sec2·165·103kg =304 kN.

Συμπεράσματα

a)    The value of the approximate calculation of the fundamental natural period and the design seismic acceleration lies in checking the correctness of the corresponding quantities derived from the algorithms of the modal response spectrum analysis.

In the related software, the fundamental natural period is obtained from the modal response spectrum analysis and is shown as a red arrow in the seismic acceleration graph at the elevation of the centre of mass.

 

b)    The value of the approximate method for the triangular distribution of seismic accelerations consists in the evaluation of the accelerations obtained by the algorithms of the modal response spectrum analysis, which should follow the triangular distribution to some extent.

 

     In the related software, the triangular distribution is shown using a red dashed line.