Formwork quantity take-off (es-ES)

The structural frame
The construction (es-ES)
The reinforcement I (es-ES)
The reinforcement II (es-ES)
Quantity/Cost estimation (es-ES)
Detailing drawings (es-ES)
Tomo A´ - Introducción

Wind and Seismic Forces > (es-ES)
Structural model and Analysis (es-ES)
Modelling slabs (es-ES)
Slabs (es-ES)
Seismic behavour of frames (es-ES)
Appendix A (es-ES)
Appendix B (es-ES)
Appendix C (es-ES)
Appendix D (es-ES)
Tomo B´ - Introducción

Materials (es-ES)
To be continued > (es-ES)
Tomo C´ - Introducción

Formwork quantity take-off of ground floor

 Beams – Slabs m2 S1: 3,80 x 5,00 – 4 x 0,40 x 0,10 + 2 x 3,60 x 0,18 = 20,136 b1,b2: 2 x 5,00 x 0,50 + 2 x (5,00-2 x 0,40) x 0,32 + + 2 x 4,20 x 0.30 = 10,208 Columns (joints areas): 4 x 0,40 x 0,50 + 4 x 0,40 x 0,32 + 4 x 0,10 x 0,32 = 1,440 Total = 31,784 Columns: 4 x (0,40 x 0,40 x 2,50) = 16,000

Formwork quantity take-off of basement

 Beams – Slabs m2 S1: 4,50 x 3,90 - 4 x (0,15 x 0,15) = 17,460 b1,b2: 2 x [5,00 x 0,50 +4,20 x 0,32] +4,20 x 0,25 = 9,788 b3: 4,40 x 0,50 + 3,60 x 0,32 +3,60 x 0,25 = 4,252 Shear wall sw5: 4,40 x 0,50 + 3,60 x 0,32 = 3,352 internal column sides: 4 x 2 x 0,15 x 0,32) = 0,384 Total = 35,236 Columns: 4 x (0,40 x 0,40 x 2,50) – 2 x (0,25 x 2,50) = 14,750 Shear wall sw5: 2 x (3,60 x 2,50) = 18,000 Total = 32,750

Formwork quantity take-off of foundation

 m2 Footings F3,4,5: 0,50 x [5,00 + 2 x 1,00 + 0,30 x 2] = 5,85 Cb1,2: 2 x [0,70 x0,10 + 4,30 x 0,60 +0,30 x 0,30] 2 x [0,30 x0,10 + 3,60 x 0,60 +0,30 x 0,30] = 10,04 Sf4: (3,80 + 4,40) x 0,30 + (3,60 + 4,40) x 0,30 = 4,86 Columns: 2 x 2 [0,10 x 0,30 +0,10 x 0,10] + +(4,40+3,60 ) x 0,10 = 0,96 Total = 21,71

Spacers quantity take-off

RULES FOR ESTIMATING THE QUANTITTIES OF SPACERS AND REBAR CHAIRS
Superstructure and foundation beams:       (2 m of ‘linear spacers’ + 2 ‘pieces of point support’) in every meter of ‘clear beam length’
Columns:       (8 ‘pieces of point support’) per column
Shear walls:       2 m of ‘linear spacers’ in every meter of the shear wall’s length
Foundation slabs and footings:      (1.25 m of ‘linear spacers’) in every square meter of ‘clear slab area’
Slabs’ free edges:       (1 m of ‘linear spacers’ + 1m of ‘rebar chairs’ + 1 ‘piece of point support’) in every edge meter
Slabs’ supports:       1 m of ‘rebar chairs’ per meter of ‘every slab support’